参考例子
- 1.Bonnet joint varies from flat face gasket-joint to ring-type bonnet joint, depending on class.
- 阀盖连接方式从平面垫圈连接到环形阀盖连接，压力等级不同，连接方式也有所不同。
- 2.Bonnet joint varies from flat face gasket-joint to ring-type bonnet joint, depending on class.
- 阀盖连接方式从平面垫圈连接到环形阀盖连接，压力等级不同，连接方式也有所不同。
- 3.The bonnet and packing box of low temperature service instrument in-line valves shall be extended bonnet type or heat traced, if necessary, to avoid freezing of valve stems.
- 低温设备仪表在线阀门的阀帽和填料箱应为加长阀帽型或伴热型（必要时），从而避免阀杆结冰。
- 4.The cracking cause and repair procedure at pump bonnet are discussed in the paper. The bonnet has been successfully repaired and put into operation.
- 阐述了炼油厂焦化车间新180泵头盖裂纹的成因以及制定合理修复方案和工艺的过程。使用该工艺，成功地修复了该泵的头盖，使之安全运行至今。
- 5.Note : For long extension type bonnet and outer bearing type bonnet, do not apply this table.
- 注：此表不适用于加长型上阀盖及外部轴承型上阀盖的场合。
网络释义
- goldbrick poke slob slug vagabond
- 懒汉;
- intermeddle kibitz poke and pry
- 管闲事;
- Poke
- 手戳; 拨开; 戳, 刺; 刺探;
- poke around
- 闲逛; 閒逛; 到处闲逛; 到处找;
- poke check
- 捅球手; 杵人阻截;