参考例子
- 1.When cutting the inner corner angle at high speed, current will inject in the parts from the corner angle, and then go through from the corner angle.
- 高速切割内棱角时，水流会从棱角射入部件，然后从棱角中穿出来。
- 2.Glory-hole is the vital haulage passage in the mine of drift hole with the glory-hole method. Whether the glory-hole is normal or not may cause a tremendous influence to the mine.
- 溜井是采用平硐溜井开拓方式的露天矿山的运输咽喉，溜井正常与否对矿山生产影响极大。
- 3.Glory-hole is the vital haulage passage in the mine of drift hole with the glory-hole method. Whether the glory-hole is normal or not may cause a tremendous influence to the mine.
- 溜井是采用平硐溜井开拓方式的露天矿山的运输咽喉，溜井正常与否对矿山生产影响极大。
- 4.Screen series of closed factories and mines hole, square hole, rectangular hole, such as triangular hole sieve .
- 工矿筛系列有圆孔，方孔，长方孔，三角孔等筛板。
- 5.Graft is wider proximally than distally. A hole is drilled at each corner before cutting to decrease stress riser effect of sharp corner after remoal of graft.
- 植骨块近端宽于远端，在切取前，于取骨区四角各钻一骨孔，以降低取骨后锐角处的应力集中。
网络释义
- waiting for ya to turn the corner so he can corner ya
- 等着你拐过这个弯，好为你收尸;
- coemption corner corner in hoarding regrate stock up
- 囤积;
- coemption corner corner in hoarding regrate stock up
- 囤积;
- coemption corner corner in hoarding regrate stock up
- 囤积;
- every hole and corner
- 每个角落;